Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Uživatelský manuál stáhnout pdf (Strana 10)

Select each grade and assign a name (i.e. Unleaded

Regular).

4. Enter the number of fueling points. In this example

there are 4.

Select Fueling Point 1 and program the number of

hoses. For this example there are 3 available grades

at FP1 and FP2. (number of hoses =3)

and 4 grades available at FP 3 and 4 (number of

hoses = 4). Continue to enter the number of hoses

for each fueling point.

6. After the number of hoses are programmed, push

the auto-conguration button for fueling point 1.

This will allow the console to automatically program hose

information (grade association and position) for the Fueling

points based on information received from the D-box.

7. Follow the instructions on the screen.

Note: Dispensing small amounts of fuel from each hose

is required before copying the information to other

fueling points that have the same number of hoses.

Run Autocongure before copy.

Conrmation Screens:

This will allow the console to verify grade and fueling point

assignments.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Žádné komentáře

Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Uživatelský manuál Strana 10